29
Appendix A-Hyper Terminal
Hyper Terminal software can be used for basic PDU configuration.
It utilizes a text-based interface and menu system. Navigation
through the interface is done by typing the number of the menu
option and pressing the Enter key. For COM port setting values,
please refer to p.12 Option 4: Hyper Terminal or Terminal Emulator
section. Note: The session will timeout and logout after 3 minutes
of inactivity. Menu options are shown below:
[Main Menu]
1. Outlet Manager (Switched Series Only)
2. Network Settings
3. System Configuration
4. Account Settings
5. Configure System to Default
6. Logout
[Outlet Manager]
1. Outlet Control
2. Outlet Configuration
[Network Setting]
Physical MAC Address: 00-0C-15-40-08-A9
1. System IP: 192.168.24.20
2. Subnet Mask: 255.255.255.0
3. Default Gateway: 192.168.24.254
4. DHCP: Enabled
5. Http Port: 80
6. Http Access: Enabled
[System Configuration]
1. Date (mm/dd/yyyy) : 11/11/2011
2. Time (hh:mm:ss): 17:17:25
3. Name:PDU20SW8FNET
4. Contact: Administrator
5. Location: Server Room
[Account Setting]
1. Administrator
2. Viewer (Web Only)
[Configure System to Default]
Sure to Configure System to Default
1. Yes
2. No
Appendix B-Power Device Network Utility
Overview
The CyberPower Power Device Network Utility is an easy-to-use
interface which is used for establishing IP addresses on CyberPower
PDU devices.
Installation
Step 1. Download the Power Device Network Utility software.
Step 2. Select
Next
in the software wizard (Shown in Figure 1).
Figure 1
