22
Operation
Environmental Monitoring (optional)
CyberPower PDUs along with the environment sensor
(ENVIROSENSOR) provide temperature and humidity monitoring
in a server closet and/or datacenter remotely. To connect the PDU
with ENVIROSENSOR, use the RJ45 Ethernet Cable. Plug one end
into the Daisy Chain (In)/ENVIROSENSOR port on the PDU and the
other end into the RJ45 port on the ENVIROSENSOR (as shown
below). When the PDU correctly connects to the ENVIROSENSOR,
users can see the temperature and humidity data on the Web
Interface. For further information regarding ENVIROSENSOR
configuration, please refer to the Intelligent PDU Web Interface
User’s Manual.
Device Reset
•
To reset all the settings to default locally, use Reset function in
the LCD display.
•
To reset all the settings to default remotely, log in Web interface,
enter the Reset page and apply the function.
Unattended/Automatic Shutdown
PowerPanel Business Edition software automatically initiates a
graceful shutdown on the operating system. PowerPanel must be
installed on every computer or server for which the shutdown is to
take place. The software will receive a message from the PDU, and
will perform the shutdown according to the instructions provided,
including shut downs at exact times and dates.
Step 1. PC Configuration
1. Install PowerPanel Business Edition Client on every computer
or server that will be part of the shutdown process (Follow the
instructions in the PowerPanel Business Edition User Manual).
2. Configure the settings in PowerPanel Business Edition Client. See
the PowerPanel Business Edition User Manual for additional help.
Step 2. PDU Configuration
Verify that the IP address of all computers that will be part of the
shutdown process, are included in the Client List of web interface.
LED Indicators
Indicator
Status
Description
Status
Green
The PDU status is ok.
Orange
Warning.
Red
Critical.
Tx/Rx
Off
The PDU power is off.
On (Green)
The PDU power is on.
Flashing
Receiving/transmitting data packet.
Reset finished.
LINK
On
Indicates the PDU is connected to the
LAN.
Off
Indicates the PDU is not connected to
the LAN.
Outlet
On
The outlet is on and providing power.
Off
The outlet is off.
