Copyright © 2017 Cyber Power Systems, Inc.
BASIC OPERATION
11
POWER MODULE FRONT/REAR PANEL DESCRIPTION
OL6KERT3UPDUPM / OL8KERT3UPDUPM / OL10KERT3UPDUPM
1. Power Button / Power on Indicator
Master ON/OFF for the UPS. Indicates that the UPS is on and supplying
power.
2. UPS Status / Fault / Replace Battery LED Indicator
Indicates the status of the UPS whether is operating in Line, Battery or
Bypass Mode, or the UPS has an internal fault and the battery need to be
replaced.
3. Multifunction LCD Readout
Shows UPS status, information, settings and events.
4. Function Buttons
Scroll up, scroll down, select and cancel LCD menu.
5. USB port
This is a connectivity port which allows communication and control
between the UPS and the connected computer. It is recommended to
install the PowerPanel® Business Edition Agent software on the
PC/Server connected with the USB cord.
6. Serial Port
Serial port provides communication between the UPS and the computer.
The UPS can control the computer’s shutdown during a power outage
through the connection while the computer can monitor the UPS and alter
its various programmable parameters.
7. Surge Protected Communication Ports RJ-45/RJ-11
These ports are used to protect standard RJ-45/RJ-11 based products
(ADSL, LAN, Phone/ Modem-Lines) and cabling systems from surges.
8. Relay Output Connector
Convert UPS signals into real potential-free Dry Contacts for industrial
control.
9. SNMP/HTTP Network slot
Slot to install the optional SNMP card for remote network control and
monitoring.
10. Backfeed Protection Connector
Prevents power feedback from the inverter to utility power in case of
power failure and a fault in the bypass circuit.
11. EPO (Emergency Power Off) Connector
Enables an emergency UPS Power-Off from a remote location.
12. Extended Runtime Battery Module Connector
Connection for additional CyberPower XL Battery modules.
13. Input / Output Connectors
Use these connectors to attach the PDU or HW PDU to the Power
module.
