manualshive.com logo in svg

CYBELEC CybTouch 8 G, User Manual

Share
Download
CYBELEC CybTouch 8 G User Manual Download Page 9

3/34

CybTouch 8 G – User Manual

A

ug

.

 

2016  

V3.1

G

ettinG

 

Started

 

with

 C

yb

t

ouCh

 8 G

Depending on software evolutions and the type of shear controlled by the CybTouch 
(configuration/capabilities), the present manual may not fully correspond to the CybTouch 
that you currently have. However, differences are only minor.

Touchscreens are pressure sensitive. Do not press down hard on the 

screen. 
Pressing hard on the screen will damage the display. Such damage is 
not covered by manufacturer warranty!

Do not use sharp and/or pointed objects (sheet metal, screwdriver, 
metal pen ball, etc.) to touch the screen.

Use only your fingers (with or without gloves on) or a plastic pen. Make sure that your 
gloves do not have metal particles encrusted in the finger tips as they may also damage 
the screen.
Take a few minutes to practice pressing gently on the screen, you will find that the screen 
is very reactive and it is pleasant to use.

Summary of Contents for CybTouch 8 G









































Reviews:

No comments

Brands by name

Popular brands

Load more brands