7/34
CybTouch 8 G – User Manual
A
ug
.
2016
V3.1
Materials
Touching
Materials
opens the Materials page, where the default characteristics for each
material can be changed, or a new material can be configured.
The Materials page displays:
•
Material
: Selected material (here
Steel
).
•
Default thickness
for the material.
•
Density
: Default density for the material (here
7.85 kg/dm
3
).
•
Displayed
: If the material will be available to be selected for use (here
yes
).
•
Predefined thickn.
: Allows defining up to 7 different predefined thicknesses for the
selected material.
In the table at the bottom of the screen, the
min
and
max
columns must be filled for each
material. Whether or not extra sets of values are added, the software simply extrapolates
values between two completed columns.
This page may not be available, depending on the machine parameters’
configuration. To be allowed to access the Materials page, a level 2 password is
required.
Table of default values for
the selected material
Touch a heading to add a
set of default values
Blade gap tolerances
(lines must be activated
by touching their title)
