17/34
CybTouch 8 G – User Manual
A
ug
.
2016
V3.1
The bottom of the
can be populated by a number of
different icons, depending on the configuration and type of the machine. Hereafter is a list
of the available optional features.
Optional features
Automatic cut
The AutoCut function allows the operator to continuously cut simply by keeping the foot
pedal pressed down. The button turns to green
when the function is activated.
If the pedal is released, the AutoCut function is reset to Off.
Sheet support
This button controls the sheet support. It can have different functions according to
whether the sheet support is configured to work manually or automatically in sync with
the machine cycle.
• When control is manual, touching this button will activate or deactivate the sheet
support.
• When control is automatic, touching this button will synchronize the sheet support’s
state with the actual state of the machine.
In both cases, the button turns to green (like this
when sheet support has 2 positions,
or like this
when it has 3) when the function is activated.
Return to sender
The RTS function (for
R
eturn
T
o
S
ender function) allows the operator to retrieve the
piece after the cut without walking around the machine, by making the back gauge move
towards him, pushing the piece out the front of the machine.
The RTS function can only be activated if the sheet support is activated. Activating the
RTS function will make its button turn green
and automatically activate the
if it wasn’t already so.
To retrieve his part, the operator must wait for the button to turn red
, which happens
at the end of the cut. He can press and hold the button as long as needed to make the
back gauge move the cut piece towards him.
