Cyan L-AMP Engineering And Planning Manual Download Page 56

Page: 56 / 216

Cyan Z-Series Engineering and Planning Guide

Release 5.0

P a g e

700-0023-05-00 Rev. 1

LAD-40E

Figure 28: LAD-40E Block Diagram

System Requirements

•

Cyan Z22 (LAD-2P or LAD-2G in-chassis module), Z33, Z77

Note: The LAD-8i module requires software version Release 3.0 or higher for both the Z33 and

Z77 platforms. The LAD-2P module requires software version Release 3.1 or higher for the Z22

platform. The LAD-2G module requires software version Release 4.0 or higher for the Z22

platform. The LAD-2P module and the LAD-2G are compatible with both the Z22 +24V shelf

model and the Z22 -48V shelf model. The LAD-8X module requires software version Release 4.0

and higher for both the Z33 and Z77 platforms.

2.1.1 Functional Interfaces

•

Input: Up to 2, 4, 8, or 40 (10G) DWDM channels

•

Output: Up to 2, 4, 8, or 40 ITU 694.1 wavelengths

•

Channel spacing: 100 GHz

•

Optical Supervisory Channel (OSC) – 100Base-FX Ethernet at 1510nm

Note:

The LAD-2P and LAD-2G modules do not provide an OSC.

•

Physical: Front access, duplex LC/UPC connectors

•

Link budget (with 80 km DWDM XFPs):



LAD-8i: 14 dB



LAD-2P, LAD-2G, LAD-4, LAD-8: 16 dB



LAD-4A, LAD-8A: 24 dB



LAD-8E: 32 dB



LAD-40: 10 dB



LAD-40E: 28 dB



LAD-8X: 40 dB

•

Fiber types supported: NSDF (G.652), NZ-DSF (G.655)

Note:

The express port is not currently supported on any LAD module.

Summary of Contents for L-AMP



















































































































































































































Search results

Summary of Contents for L-AMP

Reviews:

Brands by name

Popular brands

Cyan L-AMP, Engineering And Planning Manual

Search results

Summary of Contents for L-AMP

Reviews:

Brands by name

Popular brands