User's Manual
V34bis Fax-modem - AJ 2885 P
AJ 2885 P - Page 14
SDM v alarm relay option:
Power On:
When the modem is connected, switch the power switch to the "On" position.
(*) Power supply DC adapter or Power supply cable.
2.2. Rackmount
version
Package Contents:
Before installing your modem, check all these items are present:
•
One
AJ 2885
card
•
One RJ11 phone cable (as an option)
•
A leased line RJ-11 cable (as an option)
•
A CD-ROM that includes
•
AT command set reference manual
•
User
manual
•
Software (as an option)
If you ordered the busy out function, check that the K3 option is available. This function forces
the line to be active when there is:
•
A faulty power supply,
•
No answer to a call after N rings (N is set by the S20 register). This maybe due to a non-
connected data terminal (DTR/108 absent).
•
N successive ineffective connection sequences (N is set by the S20 register). This maybe
due to a bad connection to the telephone line.
This option is particularly useful for line pooling applications, and in case of fault, incoming calls
are switched to another modem in the pool.
Your AJ2885 board provides an interface to the AMS controller board that is an option to your
AMS16 rack. Refer to the controller card manual for managing the AJ2885 modem through the
controller card.
230V
LL
ALARM
or
Industrial
Equipment
