Step 5
: Enter the ID number of the user access Code can unregistered id
number button “01” and “05” you wish to enroll and then press “#”
button (the LED displays id number that you have just entered)
If you want to change the PIN code already enrolled, delete the ID
number of the PIN Code first and then enrol new PIN Code
Step 6
: Enter in your own PIN Code (4 to 12 digits) and then press # button
Please record the ID number and the PIN Code for each enrolment
and the change.
This information will be needed when deleting PIN Code
(Refer to 2.3.2 for User Access Code deletion)
Step 7
: Do Step 6 again (double entry is required). A triple beep sound and a
green light indicate the successful enrollment of your PIN Code.
To continue enrolling and changing PIN Code, press “04” and “#” button
and then repeat Step 5 through Step 7.
16
17
2.3 User Access Code (PIN Code)
2.3.1 How to enroll User Access Code (PIN Code)
Each lock comes with the factory default User Access Code, which is “0000”.
IYou may enroll user access codes up to 5 including the default user access
code. For your own security it is strongly recommended that you immediately
delete the default user access code (0000) and register a new user access
code that you’ve selected (a 4 to 12 digit number). You may register a new
user access code at any time
Step 1
: Open the battery cover and press the “F” button in the back body of the lock
Step 2
: Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3
: Place the master finger or the sub-master finger on the glass of the
sensor to verify (LED displays “FO-no”)
Step 4
: Press “04” and “#” button (LED displays “id”)