30
31
2.7.2 How to set Manual “Fingerprint Sensor On” mode
If the lock is in direct sunlight which is stronger than the light emitted by initiation sensor,
then the finger may not be detected and the fingerprint sensor may not be turn on
Step 1
: Open the battery cover and press the “F” button in the back body of the lock
Step 2
: Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3
: Place the master finger or the sub-master finger on the glass of the
sensor to verify (LED displays “no”)
Step 4
: Press “11” and “#” button (LED displays “id”)
Step 5
: Enter the “1” and then press “#” button. Voice
prompt saying “Function installed” will be
heard to indicate success of Manual Sensor
On mode setting.
2.8 Time Setting mode
This is the mode to set the month/date/time which is required only if you are
using the optional audit trail function. You can download entry log data with
month/date/time of the each event as well as ID number of the entrant stored in
this lock to PC via serial cable. You need
2.8.1 How to set Month/Date/time
Step 1
: Open the battery cover and press the “F” button in the back body of the lock
Step 2
: Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3
: Place the master finger or the sub-master finger on the glass of the
sensor to verify (LED displays “FO-no”)
Step 4
: Press “12” and “#” button (LED displays “id”)