Step 4
: Press “01” and “#” button (LED displays “id”)
Step 5
: Enter an ID number, which is a 2 - or 3 - digits number’s between “10”
and “999” and press “#” button
(The fingerprint sensor will then turn on with a red light and LED
displays ID number you just entered)
Please record the ID number and the details for each fingerprint enrolled.
please note that you need this id number when you delete the fingerprint
that’s associated with this number (Refer to 2.1.2 for deletions)
Step 6
: Place chosen user finger on the glass of the fingerprint sensor twice
while the fingerprint sensor turns on and off twice.
A triple beep sound and a green light indicate the success of the user finger
enrollment and LED displays “id” for more user finger enrollment.
To continue enrolling more user fingers, or try again if unsuccessful, enter
“ID” number (“10” through “999”) and press “#” button and then repeat Step 6
To stop enrolling user finger, please pull down the sliding cover in front body
CAUTION
: To enroll the user’s fingerprint, please press the user ID and #.
If you press only #, the ID shared automatically, so the
enrollment can be settied at sub-master finger
12
13
2.1.3 How to enroll user fingers (ID Number 10 through 999)
The ID numbers assigned for user fingerprints are from “10” through “999” and
you can take same steps for sub-master fingerprints except ID numbers.
Step 1
: Open battery cover and press the “F” button in the back body of the lock
Step 2
: Pull up the sliding cover in the front body of the lock
(The fingerprint sensor will then turn on with a red light)
Step 3
: Place master finger or sub-master finger on the glass of the sensor to
verify (LED displays “FO-no”)
A triple beep sound and a green light indicate the success of the sub-master
finger enrollment and LED displays “id” for more sub-master finger enrollment.
To continue enrolling more sub-master fingers, or try again if unsuccessful,
enter “ID” number (“01” through “09”) and press “#” button and then repeat
Step 6
To stop enrolling sub-master finger, please pull down the sliding cover
infront body
2.2 Fingerprint Deletion
2.2.1 How to delete Single Fingerprint from lock
Step 1
: Open the battery cover and press the “F” button in the back body of the lock