Page 27
Interval
Action
Instructions and reference
clean any remains of Loctite from the
thread housings using a male thread.
Wear
Check for the presence of wear or cracks
in mobile elements, whether in the
crankcase or in the casing.
Every 150
hours
Maintenance check
General check. Disassembly and general
cleaning of the machine by a
representative authorised by the
manufacturer or by a qualified technician.
Replacement of seals and gaskets.
Replacement of engine oil and air filter.
Table 5.2: User maintenance programme
5.3 Lubrication
With regard to the motor, please follow the recommendations detailed by the
manufacturer in their service manual.
As for the post driver’s mechanism, please follow the instructions detailed in
section 5.2.
5.4 Cleaning
C
LEANING PRIOR TO MAINTENANCE OR TECHNICAL SERVICE
Before carrying out maintenance or technical service, the machine’s proprietor
must clean it.
O
N SITE CLEANING
After repeated working cycles, it is possible for dirt, dust and vegetable particles
to accumulate, as they tend to be suspended or in contact with the machine due
to the working environment. This must be taken into consideration when
designing a cleaning protocol.
Summary of Contents for JC300
Page 2: ...Page 2...