Page 24
Always use both hands, gripping the post driver’s handles, and do not press the
throttle trigger until the operator is in a firm, safe position to start operating.
With the motor on, start the operation by squeezing the throttle trigger as
established in the table in section 4.4.
4.5 Post-work procedures
Before removing the machine from the post, release the throttle trigger and wait
until the engine is idle.
Please make sure no remains from the stake have been left in the hammer cover.
Make sure the post is in the desired location. To improve productivity and reduce
the risk of injuries, we recommend the posts are placed in the chosen locations
before using the post driver.
CAUTION
Fire hazard.
Make keep the machine is kept
away from any vegetation present in the
surrounding area that may come into contact
with the exhaust system’s hot parts.
C
LEANING
We recommend the machine is cleaned at least in the following situations:
I. Upon finishing a working day.
II. Every time a component is disassembled as a consequence of
maintenance or repair.
5 Maintenance
This chapter provides a maintenance programme and instructions for the routine
maintenance of the components.
5.1 General
With regard to the motor, please follow the manufacturer’s service manual.
It is important to carry out regular maintenance so the machine may continue to
operate safely and smoothly. The user must carry out daily and monthly
maintenance tasks.
Summary of Contents for JC300
Page 2: ...Page 2...