Mounting Low DF Nose to Cage Mounting High DF Nose to Cage
- In the hole shown in the above image marked with
the “X”, use (1) 5253 screw to fasten the body panel
to the Front Down Tubes.
- In the hole shown in the above image marked with
the “X”, use (1) 5253 screw to fasten the body panel
to the Front Down Tubes.
- Use a .113” drill or smaller thru the (2) remaining
holes in the Front Down Tube to make the holes
marked by the “O”.
X
O O
X
- Re-attach the Front Bumper using (2) 5254 Screws in the remaining holes. Optional front wing mounts
will attach using the screws noted with the “X”.
5254
X
2
5253
5254
X
2
5253
X
X
X
X
Top Wing:
Assemble the wing kit using the instructions provieded inside the wing kit. Mount the wing to
the car and it should look just like the car shown below.
Summary of Contents for ENFORCER G6
Page 16: ......
