10
Special Functions
Using the mounted USB ports
The convenient USB ports located on each side of your adjustable
bed provide easy access for charging today's tech devices.
Activating the emergency power down feature
Locate and remove the cover on the 9V battery compartment
of your control box.
Install two (2) alkaline 9V batteries (not included with the
adjustable bed). Replace the battery cover.
When the 9V batteries are installed and a power failure occurs,
press the
FLAT
button on the remote control for the bed to
return to a flat position.
NOTE:
The 9V batteries are for single use only. After lowering
the adjustable bed once during a power failure, replace with a
new set of batteries.
1
3
2
Your adjustable bed supports the emergency power down feature when a power failure occurs while the head and/
or foot sections are raised.
Resetting your system
Resetting the system is sometimes necessary to restore the system to its factory setting, clear a system error, or
change a tandem system to a single system or to two independent systems.
Unplug the power cord from the electrical outlet.
Press and hold the
FLAT
button to continue sending a signal to
the control box, and then plug the power cord back in.
Wait for 7 seconds, and then release the
FLAT
button.
NOTE:
The control box must receive the Flat signal from the
remote control for at least 5 seconds after the power cord is
plugged back in. The reset is complete.
Pair the remote control with the control box again. For
more information, see "Pairing your remote control to your
adjustable bed" on page 12.
1
2
3
4
