Custom Engineering PLUS II, User Manual

Page: 28 / 64

1.9 HEXADECIMAL DUMP
This function is used to display the characters received from the com-
munications port; after the reception of each 8 characters from the
communications port, the printer prints out both the hexadecimal code
received as well as the corresponding ASCII code.
Shown below is an example of a Hexadecimal Dump:
1.10 MAINTENANCE
1.10.1 Changing the paper roll
To change paper roll, proceed as follows:
Open the paper roll compartment by pressing the OPEN key (see fi g.1.16) or using the two opening 1.
levers on the plastic cover for model with OPTION -0128 (see fi g.1.17).
Move down the plastic cover to the maximum opening (see fi g.1.18). 2.
Place the paper roll making sure that it unrolls in the proper direction as shown (see fi g.1.19). 3.
Take out the paper and close the plastic cover (see fi g.1.20). 4.
Push on the plastic cover to lock it (see fi g.1.21). 5.
Tear off the exceeding paper using the jagged edge (see fi g.1.22). 6.
NOTE:
Unless otherwise indicated, the operations are valid for all the PLUS II models.
1
Models with OPEN key Models with OPTION -0128
(Fig.1.15)
(Fig.1.16) (Fig.1.17)
HEXADECIMAL DUMP
12345678
90123456
789uisdf
hkjsdhfh
sdfkjhsd
fsdfkhjw
eioyuwqe
oriuweri
ouweriou
weriouwe
riouwerh
klsdfhks
dfksdfhj
sdfkj
≥ sd
fk ≥ jshdf
jklh
31 32 33 34 35 36 37 38
39 30 31 32 33 34 35 36
37 38 39 75 69 73 64 66
68 6B 6A 73 64 68 66 68
73 64 66 6B 6A 68 73 64
66 73 64 66 6B 68 6A 77
65 69 6F 79 75 77 71 65
6F 72 69 75 77 65 72 69
6F 75 77 65 72 69 6F 75
77 65 72 69 6F 75 77 65
72 69 6F 75 77 65 72 68
6B 6C 73 64 66 68 6B 73
64 66 6B 73 64 66 68 6A
73 64 66 6B 6A F2 73 64
66 6B F2 6A 73 68 64 66
6A 6B 6C 68
1. INSTALLATION AND USE
1-14 PLUS II
User Manual