D160S-T420 Portable
Service Hose Crimper
22
Step 4:
Slide the
Pusher
onto the pusher retaining ring on the hydraulic
cylinder.
Note:
Make sure slot in pusher goes over lip on pusher retaining ring
Refer to page 11 for details if needed.
CAUTION:
Damage to the pusher and retaining ring can occur if they
are misaligned.
Step 5:
Set the
T420 Micro-Crimp Adjuster
to “0”.
CALIBRATION CHECK PROCEDURE
Step 6:
Apply pressure to the (Hand or Pneumatic Pump), to bring the
pusher in contact with the compression ring.
