Custom Audio Electronics STIMARE STIMA-SML, User Manual

Page: 77 / 86

CUSTOM/POS emulation
To deine the alignment point you need to set the printer parameters that compose the numerical value of the “Notch Dis
-
tance” parameter. (see par.5.4).
For example, to set a notch distance of 15mm between the notch and the alignment point, the parameters must be set on
the following values:
Notch Distance Sign : +
Notch Distance [mm x 10] : 1
Notch Distance [mm x 1] : 5
Notch Distance [mm x .1]
: 0
The “Notch Distance” parameter, may be modiied as follows:
•
during the Setup procedure of the device (see chapter 5)
• by modifying the Setup.ini ile (see par.12.5)
•
by using the 0x1D 0xE7 command (for more details, refer to the Commands Manual)
•
by driver
SVELTA emulation
The ticket features and the alignment parameters, may be modiied as follows:
•
by using the parameters of the <LHT> command (for more details, refer to the Commands Manual)
• by modifying the Setup.ini ile (see par.12.5)
•
by driver
The following igure shows the some of parameters for alignment of the Setup.ini ile:
•
“Ticket X Dimension”
•
“Ticket Y Dimension”
•
“Notch Width”
•
“Notch Distance”
PRINTING DIRECTION
“Notch Distance”
“Notch Width”
“Ticket X Dimension”
“T
icket Y
Dimension”
Alignment
point
77
CUSTOM-Powered