Custom Audio Electronics STIMARE STIMA-SML, User Manual

Page: 39 / 86

TICKET LOCKING This parameter enables/disables the block of the paper inside the device where the ticket
is not cut with the cutter, but is presented for the manual tear off by the user:
Disabled D = paper block disabled
Enabled = paper block enabled
NOTE: If the “Notch/B.Mark Position” parameter is disabled, the parameter is not printed.
TICKET MANAGEMENT This parameter allows the ticket management:
Disabled D = no check
Check First = before printing, the device checks the integrity of the irst ticket
CASING TYPE Type of device casing:
Plastic D = plastic casing
Metal = metallic casing
PRINTHEAD TEST
POWERON Setting of the performing of the print head test:
Disabled D = the test is performed only during the printing of the setup report
Enabled = the test is performed at each power on
PRINT DENSITY Adjusting the printing density:
-50% -12% +25%
-37% 0 D +37%
-25% +12% +50%
39
CUSTOM-Powered