Custom Audio Electronics P3, User Manual, Page: 46 / 68

Printhead
Disconnect the power supply cable and
open the device cover (see paragraph 4.1).
Clean the printhead by using
a non-abrasive cloth moistened with isopropyl.
ATTENZIONE:
Non utilizzare solventi o spazzole dure. Assicurarsi che
acqua o altri liquidi non penetrino all’interno del dispositivo.
Per rimuovere i residui di stampa, utilizzare delle pinzette o
aria compressa.
ON
ISOPROPYL ALCOHOL
1
2
Disconnect the power supply cable and
open the device cover (see paragraph 4.1 ).
Platen roller
Disconnect the power supply cable and
open the device cover (see paragraph 4.1).
Clean the platen roller by using
a non-abrasive cloth moistened with isopropyl.
ATTENTION:
Do not use solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
ISOPROPYL ALCOHOL
1
2
Disconnect the power supply cable and
open the device cover (see paragraph 4.1 ).
46