Custom Audio Electronics Kube II, User Manual

Page: 37 / 80

USB ADDRESS NUMBER
Numerical address code for the univocal identiication of the USB device (in case of more
than a USB device connected with the same PC):
0 D 2 4 6 8
1 3 5 7 9
AUTOFEED Setting of the Carriage Return character:
CR disabled
D
= Carriage Return disabled
CR enabled = Carriage Return enabled
PRINT MODE Printing mode:
Normal D = enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
CHARS / INCH Font selection:
A = 11 cpi, B = 15 cpi
A = 15 cpi, B = 20 cpi
D
NOTE: CPI = Characters Per Inch
SPEED / QUALITY Setting of printing speed and printing quality:
Normal D
High Quality
High Speed
PRINTING WIDTH Width of printing area:
76mm
D
(80 PaperW)
80mm (82.5 PaperW)
NOTCH ALIGNMENT Alignment management:
Disabled D = the black mark alignment is not performed
Enabled = the black mark alignment is performed
NOTCH THRESHOLD Threshold value for the recognition of the presence of black mark by the black mark sensor:
0.75 V 2.00 V
D
1.00 V 2.25 V
1.25 V 2.50 V
1.50 V 2.75 V
1.75 V
NOTE: If the “Notch Alignment” parameter is disabled, this parameter is not printed
37