Curtiss-Wright FHA5-XE1MWB04-00 User Manual Download Page 11

Page: 11 / 81

FOREWORD

1-3

SL240 XMC User Guide

The information in this document has been carefully checked and is believed to be accurate;

however, no responsibility is assumed for inaccuracies. Curtiss-Wright reserves the right to make

changes without notice.

Curtiss-Wright makes no warranty of any kind with regard to this printed material, including, but

not limited to, the implied warranties of merchantability and fitness for a particular purpose.

SL100/SL240 Dual-Port Memory FIFO U.S. Patent #6,259,648.

is a registered trademark of Curtiss-Wright

is a registered trademark of Curtiss-Wright.

This product and all Curtiss-Wright LinkXchange products referred to in this document are

protected by one or both of the following U.S. patents 6,751,699 and 5,982,634.

CompactFlash® is a registered trademark of the Compact Flash Association (CFA).

All Curtiss-Wright, LinkXchange® products referred to in this document are protected by one or

both of the following U.S. patents 6,751,699 and 5,982,634.
Curtiss-Wright, is an Associate Level member of PICMG and as such may use the PICMG and

CompactPCI logos.

Any reference made within this document to equipment from other vendors does not constitute

an endorsement of their product(s).

Revised: April 12, 2017

Curtiss-Wright Defense Solutions

2600 Paramount Place Suite 200

Fairborn, OH 45324 USA

Tel: 800-252-5601 (U.S. only)

Tel: 937-252-5601

Summary of Contents for FHA5-XE1MWB04-00
















































































Search results

Summary of Contents for FHA5-XE1MWB04-00

Reviews:

Related manuals for FHA5-XE1MWB04-00

Brands by name

Popular brands

Curtiss-Wright FHA5-XE1MWB04-00, User Manual

Search results

Summary of Contents for FHA5-XE1MWB04-00

Reviews:

Related manuals for FHA5-XE1MWB04-00

Brands by name

Popular brands