![background image](http://html1.mh-extra.com/html/curtis/enable-40/enable-40_manual_2699544042.webp)
36
Curtis enAble
®
40 Manual,
Rev. E
6
6 — MONITOR MENU
MONITOR MENU
Through its Monitor menu, the programmer provides access to real-time data
during chair operation. The Monitor menu has six submenus, which follow the
Active Config parameter at the top of the menu:
MONITOR MENU
—Active Config
—
Handcontrol
—Seat
—Lights
—Motor Controller
—Motors & Brakes
—Battery
MONITOR MENU
DISPLAY
ITEM
RANGE
DESCRIPTION
Active Config
1–4
Configuration that is currently selected.
HANDCONTROLS • • •
Drive Command
-100 – +100 %
Requested normalized (to 100%) Y-axis
throttle request incorporating the deadbands.
Turn Command
-100 – +100 %
Requested normalized (to 100%) X-axis
throttle request incorporating the deadbands.
Speed Mode
1 – 9
Speed Mode setting.
Speed Command
0 – 100 %
Speed Limit value in effect.
Horn Button
On/Off
Status of the Horn button.
Mode Button
On/Off
Status of the Mode button.
Aux 1 Button
On/Off
Status of the Aux 1 button ( ).
Aux 2 Button
On/Off
Status of the Aux 2 button ( ).
Left Turn Button
On/Off
Status of the Left Turn button.
Right Turn Button
On/Off
Status of the Right Turn button.
Hazards Button
On/Off
Status of the Hazards button.
Running Lights Button
On/Off
Status of the Running Lights button.
Handcontrol Inhibit
On/Off
Status of the Handcontrol Inhibit input.
SEAT • • •
Actuator 1 Voltage
-37.5 – +37.5 V
Voltage applied to Actuator Motor 1.
Actuator 2 Voltage
-37.5 – +37.5 V
Voltage applied to Actuator Motor 2.
Actuator Current
-12.0 – +12.0 A
Current through the actuator motors.