
27
Curtis enAble
®
40 Manual,
Rev. E
5 — PROGRAMMABLE PARAMETERS:
Sound & Display and Charger Inhibit Parameters
The parameters in the
Handcontrol Inhibit
menu allow the actuator functions
to remain active while the charger is plugged into the handcontrol.
The chair’s
drive functions
are disabled automatically when the charge
inhibit input is pulled to ground. The Handcontrol Inhibit parameters allow
you to choose whether the
actuator functions
will also be disabled.
One or both actuators can be halted in either, both, or neither direction.
Setting a Halt parameter to Off allows that specific movement (such as tilt
forward) during charging.
SOUND & DISPLAY MENU
PARAMETER
RANGE
DESCRIPTION
Rev Beep
On/Off
Provides a backup alarm when the chair is in reverse.
Command Beep
On/Off
Provides a short beep each time a button is pressed.
Error Beep
On/Off
Provides a beep when errors are present.
Backlight Day
0–100 %
Sets the brightness of the LCD display backlight when the running
lights are off.
Backlight Night
0–100 %
Sets the brightness of the LCD display backlight when the running
lights are on.
HANDCONTROL INHIBIT MENU
PARAMETER
RANGE
DESCRIPTION
Halt Act 1 Dir-
On/Off
Actuator 1 will be halted in the negative direction.
Halt Act 1 Dir+
On/Off
Actuator 1 will be halted in the positive direction.
Halt Act 2 Dir-
On/Off
Actuator 2 will be halted in the negative direction.
Halt Act 2 Dir+
On/Off
Actuator 2 will be halted in the positive direction.