background image

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS

TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO 

PERSONS, PLEASE CAREFULLY READ ALL SAFETY INSTRUCTIONS.

THE SEPARATE OPERATING MANUAL MAY CONTAIN ADDITIONAL SAFETY 

INSTRUCTIONS.

THIS PRODUCT IS DESIGNED FOR DOMESTIC USE ONLY. COMMERCIAL OR 

ANY OTHER USE MAY INVALIDATE THE GUARANTEE AND MIGHT BE 

DANGEROUS.

          TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE ANY COVER 

Mains plug and mains lead

We have fitted this equipment with a standard mains plug.
  If you cut off the mains plug or fit a different type, destroy the old plug, as it is dangerous to 
insert it into a live power outlet.
  If a fuse is fitted to the plug, remove the fuse before throwing the plug away.
  Carefully follow the wiring instructions supplied with a new mains plug.
  Never use a fused mains plug without the fuse cover.
  If the mains lead becomes damaged, it must be replaced by the manufacturer, its service 
agent or similarly qualified person with an approved mains lead of the same type and rating 
to avoid a hazard.
  Make sure the mains lead cannot be walked on crushed, chafed or cut and that it is routed in 
such a way as to reduce the risk of a tripping hazard.
  Do not let the mains lead hang over edge of a table or counter or come into contact with hot 
surfaces.
  Do not immerse the mains lead or mains plug in water or any other liquid.

Mains plug wiring for the UK

In a re wirable plug the wires in the mains lead of this equipment must be connected as 
follows.

  The wire coloured brown must be connected to the terminal that is marked with the letter L.

  The wire coloured blue must be connected to the terminal that is marked with the letter N.

  There is no green or green and yellow wire. Do not connect anything
   To the Earth terminal which is marked E, or with a           symbol.

  You must make sure the mains lead is firmly secured under the cord clamp.

Mains fuse

UK standard (BS1363) plugs must be fitted with a BS1362 standard fuse rated at 3A or 5A.

Ventilation

Allow at least a 10cm gap all around. Don't obstruct the ventilation slots with soft furnishings. 
Overheating will increase the risk of fire.

Cleaning

Disconnect the mains supply and use only a lightly dampened soft cloth. Do not use chemical 
solvents or strong detergents as these may damage the cosmetic finish.
Never allow water droplets to remain on the screen as moisture can cause permanent 
discoloration. Greasy marks must
be removed using a commercially available cleaner for LCD screens.

Batteries

Remove batteries when the remote control is not to be used for a long time.  Batteries left in 
the product may cause damage through deterioration and corrosive leakage, invalidating the 
guarantee. To protect the environment, use local recycling facilities for disposal. Never throw 
batteries on a fire!  Danger of explosion.

Wall or stand mounting

Products that may be mounted on a stand or wall must be securely attached in accordance 
with the installation instructions. Never fit non-approved stands or legs.
For wall mounting, always ensure the area to be drilled is free from electrical wires, water 
and gas pipes, by using a suitable locator device.

Do not expose this product to dripping or splashing or place any objects filled with 
liquids, such as vases, on the product.
Never put a naked flame source such as lighted candles on or near the product.
Pull the mains plug out of the wall socket and disconnect the external aerial during 
thunderstorms.
If anything goes wrong, don't try and fix it yourself, get a qualified service agent to 
carry out any repairs or maintenance.
Save these instructions for future reference.

We have designed and made this product to meet European safety standards, but as with 
any electronic equipment you must take care.

Here is some good advice to help you stay safe and get the best results
Install

 or locate this product only in accordance with the installation instructions found in 

the instruction book supplied separately.

Use this product only for its intended purpose

 as described in the operating instructions 

supplied separately.

Children

 and the infirm must be closely supervised by a competent person. If the product 

includes small parts, do not let children play with it.

Examine the product thoroughly:

 if it is damaged in any way notify the retail store where 

you purchased it.

For products supplied with a mains adapter or a detachable mains cord,

 if the adapter 

or its leads get damaged, it must be replaced with an adapter of the same type and rating.

To save power, 

disconnect from the mains when you are not using the product unless the 

function of the product requiresa continuous power supply.

If the mains switch does not disconnect the product from the mains: 

The mains plug 

shall be the main disconnect device and shall be operable at all times.

Avoid harsh conditions 

such as wet or damp places, rain, high humidity, strong vibration, 

extremely high or low temperatures, strong sunlight and places that are very dusty.

DO NOT

 install or use this product if you have spilt liquids in it, if it is damaged in any way, if 

it has been dropped   or if it does not work normally. Disconnect from the mains and seek 
expert advice.

DO NOT

 leave the product unattended while it is operating unless it is designed to do so.

DO NOT

 store this product outdoors or expose to rain or moisture.

DO NOT

 use this product near water, for example near a kitchen sink, in a bathroom or near 

a swimming pool unless specified in the operating instructions.

DO NOT

 remove outer panels or covers from the product. Repairs must only be undertaken 

by a qualified service person.

DO NOT

 place the product or mains lead near a hot surface such as a gas or electric cooker 

or fire.

DO NOT

 operate the product when room humidity is excessive.

Power supply
Make sure the voltage marked on the rating plate on the rear of the product matches 
the supply in your area.

An incorrect supply voltage is dangerous and may result in a fire or damage to the product.
The manufacturer accepts no responsibility for any damage or injury resulting from 
connecting to any voltage other than that specified on the rating plate located on the back of 
the product. See the instruction book for exact voltage range.

Summary of Contents for DVB203UK
















Reviews: