![background image](http://html1.mh-extra.com/html/curtis/cbp/cbp_service-manual_2699169002.webp)
2
Program Menus
Tea Recipes
Program Menus
Continued on Page 3
Brewing Instructions – Tea
1. Brewer should be ON (Confirm at rear toggle switch, then press ON/OFF button) and Ready-to-Brew
displayed.
2. Make sure deck is folded down and tea container is in place.
IMPORTANT –
Tea container must be pushed all the way to the back to ensure the safety switch is engaged and tea brewing can start
(see exception on page 11).
3. Place filter in brew
basket. Pour tea
into basket marked
ICED TEA.
4. Slide brew cone
into rails. Place
tea container
under brew cone.
5. Slide container in
to activate switch
behind folded
coffee deck.
Programming
Turn off (dark display) by pressing ON/OFF button (yellow). Press and
hold
BREW button 4 (green) and then press and release ON/OFF button (yellow).
Continue holding BREW button. Display will read
, wait until
is displayed Enter the 4-digit access code, the digits 1-4 corre-
spond to the buttons (see illustration below).
The default code set at the factory is 1-2-3-4. Then
will be displayed.
Your Curtis G3/Gold Cup Series is Factory Pre-Set for Optimum Performance.
After connection to water and power; the rear toggle switch must be on. You will hear a beep sound, indicating power is available to the controller.
The control displays
. Press ON/OFF button and the screen will display
. After three seconds,
is displayed.
Water will fill the tank (approximately 2-3 minutes depending on water flow rate). When the proper level is reached
will appear on the
screen. It takes approximately 20 minutes to reach set point temperature of 204°F.
Control will display
when temperature reaches the set point (204°F). Unit is now ready to brew.
<Coffee/Tea Brewer>
CURTIS
CURTIS
ENTER CODE
– – – –
PROGRAM MENUS
< SELECT >
CURTIS
READY TO BREW
ENTERING PROGRAM
MODE
All programming selections are performed with the three center buttons.
The symbols below the buttons are:
Scroll LEFT
SELECTION or ENTER to save new parameter
Scroll RIGHT
4
3
1
2
CURTIS
FILLING
CURTIS
HEATING
Selecting Brew by Volume or Brew by Time depends on whether you know your brew time before starting.
From
Program Menus
press > display will now show the next feature.
Tea Recipes
(Factory set to Standard – Purple)
Press
to Select. Press < or > to toggle between Standard-Gray, Standard-Purple, Tropical-Gray, Tropical-
Purple, 76/308-Gray and 76/308-Purple. Set and exit programming by pressing
.
SPRAYHEADS
: Mentioned in this Programming guide are the words Gray and Purple. This
refers to the color of the sprayhead. The current sprayhead is the purple AFS. The older
version is the gray sprayhead. See the illustration at right.
PURPLE
GRAY
6. Press the tea brew
button to begin
brewing tea.
Summary of Contents for CBP
Page 10: ...Electrical Schematic ...
Page 11: ...Rough In Drawing ...