![background image](http://html1.mh-extra.com/html/curtis/cbhs67000-001/cbhs67000-001_user-manual_2699167014.webp)
CLEANING INSTRUCTIONS
CI6
5&"%*41&/4&3$-&"/*/(*/4536$5*0/4ø
"
Cleaning the Tea Dispenser (Daily)
Cleaning the Container
Prepare a mild solution of detergent and warm water.
Remove the dispenser from the brewer and remove the
lid. Rinse.
2
Wash
- Wipe the exterior surfaces with a sponge and
the detergent solution to remove spills and debris. Use
the detergent solution and a soft bristled brush to wash
the inside of the container.
3
Rinse
- Rinse with clean, warm water.
4
Sanitize
* - Sanitize the interior of the dispenser using a
commercial sanitizer suitable for food grade applications.
Sanitize according to the directions on the package.
* If a three compartment sink large enough to submerge
the dispenser is not available, swab, brush or pressure
spray the sanitizing solution according to the directions
on the package.
5
Air Dry
- Turn the container upside down and allow to
air dry.
Cleaning the Faucet Parts, Lid and Drip Tray
Disassemble the faucet - Unscrew the faucet assembly
from the dispenser. Then, unscrew the handle/bonnet
assembly from the top of the faucet and remove. Inspect
the seat cup for wear. Replace the seat cup if it is
damaged.
2
Wash
- Wash the lid, drip tray and faucet parts with the
detergent solution.
3
Rinse
- Thoroughly rinse all parts with clean, warm
water.
4
Sanitize
- After rinsing, place the faucet parts in the sink
to be sanitized. Immerse them in a commercial sanitizer
suitable for food grade applications. Sanitize according
to the directions on the package.
5
Air Dry
- Allow all parts to thoroughly air dry.
6 Reassemble - When dry, reassemble the handle/bonnet.
Hand tighten the handle/bonnet onto the top of the faucet
assembly. Hand-tighten the faucet assembly onto the
dispenser outlet.
Seat cup
Faucet
Handle
Bonnet