PROGRAMMING MENUS
After entering programming mode press
Ż
or
Ź
to display the various programming menus:
Press
~
to enter the each individual programming menu. Detailed descriptions of each menu and the
programmable features are below and on the following pages.
Coffee Recipes Menu
Sets coffee recipe. Press
Ż
or
Ź
to choose from Gourmet STD, Light Roast, Dark Roast, High Yield, Filter
Pack or Decaf. Press
~
to save and exit programming mode.
Non-Brew Program Menu
Temperature -
adjusts the maximum tank water temperature. Once accessed (
~
), press
Ż
or
Ź
to
increase or decrease the temperature. The range is 170ºF to 208ºF. Press
~
to save. Press
Ź
to display the
subsequent menu features.
Energy Save Mode -
saves energy during periods when the brewer is not in use. When set to On, the brewer
automatically shuts off four hours after the last brew cycle. Press the ON/OFF button to return to normal
operation. When set to On-140ºF, the brewer shuts off four hours after the last brew cycle, but the water tank
temperature remains at 140ºF. Use the On-140ºF setting to reach brewing temperature faster after periods
of non-use. Once accessed (
~
), press
Ż
or
Ź
to choose the desired setting. Press
~
to save. Press
Ź
to
display the subsequent menu features.
Brew Count Odom -
When accessed, this feature displays the total brew cycles since the odometer was last
reset. Press
Ź
to go back without resetting or
~
to
reset. Press
Ź
to display the subsequent menu features.
Brew Count Total -
when accessed (
~
), displays the total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically after a few seconds. Press
Ź
to display the subsequent
menu features.
Cold Brew Lock -
adjusts the temperature at which the brewer will brew when a BREW button is pressed
(
Ready to brew
appears on the display). This feature also adjusts the temperature at which the heating
element turns on to reheat the water in the tank. The available settings are 5°F, 15°F and Off. Off is within 30°F
below the temperature setting. Once accessed (
~
), press
Ż
or
Ź
to select the desired setting. Press
~
to
save. Press
Ź
to display the subsequent menu features.
Master Reset -
resets the brewer universal control module (UCM) to the factory default settings. Once
accessed (
~
), “Are You Sure?” will appear on the display. Press
Ż
for Yes or
Ź
for No. If you press No, the
display goes back to the programming menu. If you press Yes, the UCM will reset and exit programming
mode.
IMPORTANT:
If you reset the UCM to the factory defaults, you MUST reprogram the
Model Select
to
match the number on the model and the label on the UCM for proper operation. See
Model Select
.
continued...
PROGRAMMING GUIDE
PG5
1RQ%UHZ3URJUDP
Å
6HOHFW
Æ
&RIIHH5HFLSHV
Å
6HOHFW
Æ
%UHZ%XWWRQ3URJ
Å
6HOHFW
Æ
0RGHO6HOHFW
Å
6HOHFW
Æ
7HD5HFLSHV
Å
6HOHFW
Æ
([LW
Å
6HOHFW
Æ
WC-10007-102, PROGRAMMING GUIDE
090616NC
