Curtis 1243
GEN
2 Manual
52
3 — PROGRAMMABLE PARAMETERS:
Controller Cloning
CONTROLLER CLONING
Once a controller has been programmed to the desired settings,
these settings can be transferred as a group to other controllers,
thus creating a family of
“
clone
”
controllers with identical
settings. Note: Cloning only works between controllers with
the same model number and software version.
To perform cloning, plug the 1311 programmer into the
controller that has the desired settings. Scroll down to the
Functions menu;
“
Settings
”
is the only function included here.
Select
“
Get settings from controller
”
to copy the settings into
the programmer, then select
“
+
”
to save the settings or
“
-
”
to
abort them.
Plug the programmer into the controller that you want
to have these same settings, and select
“
Write settings to
controller.
”