Curtis Dyna-Fog 1 Series, Manual

Page: 23 / 59

The electrical control system of the Spray could be down for reasons such as:
discharged machine battery, broken remote control fuse, lost remote control or a
broken solenoid valve.
As we understand the importance of the spray applications, we include an
emergency procedure to temporary bypass the Remote Control / Battery /
Solenoid Valve spray cut-off system.
To by-pass the solenoid valve proceed as following:
1) Loosen the plastic nuts from the 2-way solenoid valve until they are
disconnected from the elbows.
2) Loosen the plastic nuts from the Union Elbow of the Flush plumbing until they
are disconnected from the union elbow. Keep in a safe place the two plastic nuts
and the short tube. The union elbow will be used in next step.
3) Install the union elbow as connecting element between the lines disconnected
in step 1.
The Spray ON/OFF could be performed with the manual 3-way valve.
Fix the problem that required the Emergency By-pass system, and restore the
machine to the standard Spray control system proceeding in reverse order.
23
UNION ELBOW
FROM FLUSH PLUMBING
PLASTIC NUTS
FROM FLUSH
PLUMBING
PLUMBING
FROM FLUSH
LONG TUBE
SHORT TUBE
FROM FLUSH
PLUMBING
SOLENOID VALVE
FROM 2-WAY
PLASTIC NUTS
EMERGENCY BY-PASS OF THE SOLENOID VALVE