31
Spray Arms
Particles of food can get stuck in the spray arm jets and bearings. The spray arms should be checked and
cleaned regularly.
1. Ensure the dishwasher is switched off.
2. Check whether or not the holes for
the upper and lower spray arms are
clogged. If there is any clogging,
remove the spray arms and clean
them under running water.
3. You can remove the lower spray arm
by pulling it upwards, while the upper
spray arm nut can be removed by
turning the nut to the left.
4. Be sure that the nut is perfectly
tightened when refitting the upper
spray arm.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature is below 0°C. If your appliance is left
in an unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This will allow all the
excessive water that remains in the unit to drain out.
3. Disconnect from the mains.
4. Empty the dishwasher.
5. Close the dishwashers door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual water
in the pipes.
Should you encounter any difficulties with the above steps, please ask a service technician for assistance.
Moving the Dishwasher
If you have to move the unit, for instance due to moving house, you are advised to:
1. Disconnect the dishwasher from the mains.
2. Disconnect the unit from the water inlet and drain. Use a suitable receptacle to catch the water.
3. Remove the unit from the current location with the hoses discharged.
4. Pull the unit out together with the hoses.
* Images are for reference only. Please refer to your individual model for details.
• Avoid over tilting the unit during transportation.
• We recommend that 2 people handle the dishwasher during installation.
Currys Essentials Freestanding Dishwasher CDW45W18 Manual.indd 31
28/03/2018 16:10
