33
Hints and Tips
Fault Code
Indicator light flashes
Possible Causes
Remedy
START/
PAUSE
Inadequate water
supply
• Make sure the water input tap is
totally open and that there is no
water cut.
• Close the water input tap,
separate the water input hose
from the tap and clean the filter at
the connection end of the hose.
• Restart your machine, contact
your service
agent if the error resumes.
Shut off valve fault
• Close the tap.
• Contact the service.
The waste water
in the machine
cannot be
discharged
• Water discharge hose is clogged.
• The filters of your machine might
be clogged.
• Power off-on your machine and
activate the program cancellation
command.
• If the error continues, contact
your service agent.
Intended water
temperature could
not be reached
faulty heater and
heater sensor
• Contact your service agent.
Alarm is active
against water
overflow
• Power off your machine and close
the tap.
• Contact your service agent.
Faulty electronic
card
• Contact your service agent.
• Repairs should only be carried out by a qualified technician in strict accordance with current
local and national safety regulations. Unauthorised or incorrect repairs could cause personal
injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.
Currys Essentials Freestanding Dishwasher CDW45W18 Manual.indd 33
28/03/2018 16:10