
21
OPEN
open
open
open
* All images are for reference only; please refer to your individual unit for actual item.
• The salt low warning indicator on the control panel will
illuminate when the reservoir is running out of salt and
requires refilling.
• The salt low warning indicator will cease to illuminate within
a few days (after re-filling), depending on how quickly the
salt dissolves.
Adding Salt
If the water in your area is hard, deposits will form on your dishes and utensils. This appliance contains
a salt reservoir for you to reduce the hardness of the water.
Please follow the steps below to pour the salt into the salt reservoir. It must be set to correspond to the
water hardness level in your area.
1. Remove the lower basket and unscrew the reservoir cap.
2. Place a funnel over the salt reservoir. Pour in approximately 1 kg
to 2 kg of dishwasher salt.
3. Fill the reservoir with water until it overflows (first use only).
4. Clean any excess salt from around the reservoir opening and then
screw the cap on again firmly.
5. Run the “Prewash” programme P4 immediately (without any
crockery in the dishwasher) to remove any traces of salt from
the compartment.
• Do not use everyday table salt or cooking salt as they contain insoluble substances which could
damage the dishwasher.
• Do not pour detergent into the salt container. This will damage the dishwasher.
Currys Essentials Freestanding Dishwasher CDW45W18 Manual.indd 21
28/03/2018 16:10