background image

INSTALLATION

8

1

2

4

5

6

7

8

9

10

11

12

60˚C

40˚C

60˚C
40˚C

COTTON

1.

2.

3.

4.

5.

6.

7.

90°C

60°   pre

40°   eco

Quick wash

20°   eco

90°C

60°  

-        cold

30°C

8.

9.

10.

11.

30°C

12.

Rinse
Spin
Drain

SYNTHETICS

DELICATE

Program

C510WM14

A

+

WOOL

Hose and Cable Lengths

How to connect from the left side

~95cm

~145cm

~95cm

~140cm

~95cm

~150cm

min. 60cm

max. 100cm

How to connect from the right side

Levelling the Washing Machine

There are 4 levelling feet on the underside. They must be adjusted to make sure the washing machine 
is level.

1.  On each foot, loosen the lock ring by turning it clockwise.
2.  Adjust all four feet by rotating each upwards or downwards.
3.  Use a spirit level to ensure the washing machine is level.
4.  Tighten each lock ring by turning them anti-clockwise (towards the washing machine body).
Ensure all four lock rings are tightened securely. Check the feet are still bolted to 
the washing machine - if they’re unbolted, the washing machine will move around.

Foot

Locking Ring

C510WM14_S14_IB.indd   8

10/02/2014   16:35

Summary of Contents for C510WM14
























Reviews: