INSTALLATION
7
Removing the Transit Bolts
To remove the transit bolts:
1. Ensure the unit is fully disconnected from the mains power by unplugging it from the mains.
2. Unscrew the four (4) transit bolts.
3. They are located at the rear side of the washing machine. Use a spanner (not included) to loosen
the four (4) transit bolts, then pull out the bolts horizontally. Ensure the plastic bolt guides (if any)
are also removed.
4. Snap in the plastic caps to cover the transit bolt holes.
Keep the four (4) transit bolts in a safe place,
in case you need to move the washing machine.
Do not run the washing machine without removing the bolts, as this can cause excessive vibrations.
Four (4) transit bolts keep the interior of the washing machine in place while it is being moved.
They must be removed before installation. Use a 10mm spanner (not included) and follow the
instructions.
1
2
3
4
C510WM14_S14_IB.indd 7
10/02/2014 16:35
