5
AMP-2150
Rear Panel Elements
4
3
2
1
9
8
6
5
1. LEVEL
Master gain control for both
individual channels.
3. LINE IN
Individual Input for each
separate channel zone.
2.
BRIDGED NORMAL SWITCH
Combines the two channels to
mono for increased power.
Turn Power OFF before
switching.
4. SPEAKER OUTPUT
Banana Jacks for making
screw down speaker
connections. Make certain
no wire whiskers touch.
5. MASTER POWER
Shuts OFF all power to the
amplifier. Use for service.
6. INPUT VOLTAGE
Allows user to switch fro 115VAC
to 220VAC. Remove protective
cover.
8. 12VDC TRIGGER IN/OUT
Controls Power state of amp by
external source. Front power
button must be in Standby Mode to
operate. Male Tip is (+). Input
12VDC/10k input. Out
12VDC/100ma out
9. IEC POWER-IN CONNECTOR
Plug female IEC cord here.
Observe selected voltage. Also
houses the main fuse. Replace
only with correct fuse.
www.currentaudio.com
©2011 Current Audio LLC
1890 Cordell Court, Suite 105 El Cajon, CA 92020 Sales 866-927-7181
AMP1270 RPA 11152013
7.
AUTO MODE SWITCH
Three ways to energize amp.
Constant ON
–MUSIC Sense
Trigger
– DC 12V TRIGGER
7
!
