12
Limited 1 Year Warranty
Current Audio, LLC amplifiers are warranted to be free from defects in materials and or workmanship to the
original retail purchaser for a period of 1 year, provided the equipment was purchased and installed from a
Current Audio, LLC Authorized Dealer or Distributor.
In the event of defective materials and or workmanship, Current Audio, LLC repair or replace, at its option,
the defective product at no charge to the purchaser. In order to make claim under this Warranty and to
obtain performance of any obligation under warranty, please contact Current Audio or your Authorized
Distributor. Instructions will be given on how to return the defective product to Current Audio. Returned
products must be shipped prepaid. Proof of purchase must be provided with the product.
The Warranty does not apply to damage not resulting from defective materials and or workmanship while in
the possession of the original consumer or due to unreasonable use by the original owner, which includes but
not limited to improper installation, negligence, unauthorized repair or modification, or aesthetic
deterioration from the environment. Products purchased by internet or unauthorized sources will void the
warranty and not be honored.
Current Audio, LLC is not liable for any incidental or consequential damages, so the above limitations or
inclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights,
which vary from state to state within the United States.
Warranty
www.currentaudio.com
©2013 Current Audio LLC
1890 Cordell Court, Suite 105 El Cajon, CA 92020 Sales 866-927-7181
AMP2150 RPA 11152013
Considerations:
•
Level setting
-start with Level at zero CCW. With a working known source connected slowly increase the Global
Level to the maximum safe listening level. When the amp is energized it will not blast the speakers or damage any
equipment including your ears.
•
Using a Volume Control-
set volume control to maximum then adjust that zone Level on amp for maximum
listening pleasure. This will prevent extra loud volumes on energizing the amp or a particular zone.
•
Adding Zones-
If more zones or rooms of music are required you can add an extra amplifier or switch to a multi-
zone amp. Use a dual RCA plug if more then one AMP2150 is required.
•
Blended Stereo
-To obtain both Left and Right blended stereo into one speaker with 2 wires, connect the (-) output
of one channel on the amp to the black (-) of the speaker then the (+) output of the other channel to the red (+) of
the speaker. You can do the same for the unused outputs for another speaker.
•
Bridged Stereo-
To obtain Stereo from two separate channels a second amplifier is required. This will provide a true
stereo high powered zone.
•
12VDC Trigger-
When using the Trigger jack to control On/Off, wire the tip of the male plug for (+) 12VDC. When
12VDC is present at the Trigger the amp will energize. The front Power Button must be in standby (RED).
•
Surge Protection-
To protect the amp from power surges and lightning strikes install the ILS120 in-line surge
protector. This will protect the amp from power surges, over and under voltage from power company and lightening.
The ILS120 can be used on TV, subwoofer, computer, projector or any equipment with an IEC plug.
•
Looping -
If a loop out is required for an addition amplifier use a dual output RCA plug.
