Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Ellia 3000Hand-E | MODEL V2021
P a g e |
13
Figure f
Figure g
Step 2.
Once you have uncovered the Chain
(G)
, it will give you access to the rear holding
nut (hidden behind the lower sprocket). Hook the hook end of the roller
(D)
onto
the rear holding nut. Each side has one. Lift the roller up so that the adjuster holes
line up with the Main Body
(E)
, take the bolt and insert this from the inside out
so that the wing nut is accessible from the outside, do this on both sides and do
up the wing nuts. This can be adjusted as you go depending on the height you
require. Repeat for the other roller.
TIP: Count the holes from top down so you have it even on both sides.
Nut
Wing
nut
Wing nut and bolt
Holding nut
Bolt and Wing nut
D
F
G
E
D
