Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Ellia 3000Hand-E | MODEL V2021
P a g e |
14
Step 3.
Put the Chain Guard
(F)
back into place and do up the bolt and wing nut. Test
that the Ellia 3000 moves smoothly by running it back and forth on a level surface.
It should move smoothly. If it seems to not roll smoothly, check that the rollers
are level by checking the adjuster bolts
(count the holes that the bolts are in to
make sure they are the same).
Changing Attachments
ALWAYS DISCONNECT DRILL OR MAKE SURE BATTERY IS OUT BEFORE
MANIPULATING PARTS WITH HANDS.
BEWARE THAT SOME OF THE ATTACHMENTS ARE SHARP
(We recommend wearing protective gloves)
Step 1.
Take off the Chain Guard
(F)
. Turn the main body upside down. Near the sprocket,
there is a small latch covering the bearing holder (
See figure h
). Pull this latch
outwards it will release the holder.
BED FORMER
SCRATCHER
MULCHER
