25
Safety information
General guidelines
Install the device on a rigid and level places.
Operate the device in conditions described in the operating condition.
Use only the components provided and authorized by Curiosis.
Ensure the input voltage matches with the device’s power supply voltage.
Check if the power cable is properly grounded to avoid potential electric shock.
Disconnect the power cable when abnormalities occur.
Wait about 2-3 minutes for the device to boot.
Do not insert any metallic objects into the device through bottom and side air vent to avoid electrical
shock causing personal injury or device damage.
Place the device around 10cm away from the surroundings for proper air-cooling.
Do not disassemble the device in any event. Contact your local distributor to arrange for service in
case of malfunctioning.
Operate the device carefully as described in this manual.
Operating condition
Operating power
100~240 VAC
Electrical input
24 VDC, 2.5 A
Frequency
~50/60Hz
Operating temperature
10~40
℃
Maximum relative humidity
20~95%
Installation site
Indoor user only
Safety standards
European standards
US standards
