21
Time setup
1.
Set total imaging
time
and
interval
. Minimum interval is 1 minute and total time can be set for up to 60 days.
(HH:MM -> Hour:Minute, DD:HH:MM -> Day:Hour:Minute)
Check whether storage is enough before starting scanning.
Important
! It is recommended to set recommended interval time below depending on the number of scan
position. If it is not complied with, condensation and stepping out may occur.
2.
Start scan by pressing
Start
. To suspend scan for a while, press
Pause
. Press Pause again to restart. Press
Stop
to
stop scanning.
✓
Total
: Scan progress
✓
Cycle
: Scanned set position/total set position
✓
Cycle Time Remaining
: Time remaining until the start of
the next cycle
✓
Elapsed Time
: Time since the scanning starts
✓
Start Date
: Date and time of starting scanning
✓
End Date
: Date and time of ending scanning
Important!
Input the equipment and plate into an incubator for more than 30 minutes for warming up to prevent
condensation before starting time-lapse.
3.
View image file (Album mode)
➢
How to view in Album mode
1.
Select Album mode.
2.
Select
on the right side of the screen.
3.
Select the desired folder. Upon opening a folder, the images in the folder are sorted, and upon selecting it, it is
displayed on the display.
Position
Recommended interval time
6-12
>10 min
12-48
>30 min
96
>1 hour
