background image

Ed. 1120 -  70702532 REV01     Donatello hood - Use and maintenance

11

Warranty

• 

8.1 Each Product sold is to be considered compliant when 
delivered in the quantity, quality and type indicated in the 
written Confirmation. Please refer to the provisions of art. 1.1.

• 

8.2 The Seller warranties:

• 

(a) 

that the Products are free from defects in material and 

workmanship, and

• 

(b)  that (except in the case of defects known or to be 
known by the Buyer) the Products are of merchantable 
quality.

• 

8.3 Any hidden defects of the Products must be reported in 
writing by the Buyer within 8 days of discovery, under penal-
ty of forfeiture. Packaging defects are excluded - even if they 
have caused defects or damage to the internal Products; in 
fact, packaging defects have to be reported at the time of 
delivery, pursuant to art. 5.8 of the present General Condi-
tions of Sale.

• 

Written notices by the Buyer for the Products defective shall 
contain a full description of the defects and faults as well as 
the mention of the delivery date and that of defect discovery 
of the Products.

• 

Warranty is excluded if the defect derives from the Buyer’s ac-
tions, such as (and not limited to) incorrect installation of the 
Product, use of the Product in a manner that does not comply 
with the normal method of use, failure to comply with the 
instructions contained in the “user and installation manual”, 
tampering with the Product. Warranty does not cover normal 
wear and tear of the Product due to use.

• 

The seller is responsible for defects that occur within one year 
from the activation of the warranty as provided for in art. 8.12 
of the present General Conditions of Sale.

• 

8.4 The Seller shall have the right to examine, or have a rep-
resentative examine, the defective Product and, should the 
existence of the defect be ascertained, the Buyer shall be en-
titled to repair or replacement, at the sole final decision of 
the Seller.

• 

Once the defect is reported, the Buyer must not use the Prod-
uct until it is examined by the Seller or by their deputy. In case 
the Seller realises that the Product was used after the notifi-
cation of the complaint, the Buyer loses the right to obtain 
replacement or repair.

• 

8.5 Replacement or repair will take place under the following 
terms:

• 

a) The Seller may repair the defective Products by going - or 
sending a deputy - to the place where such Products are 
located;

• 

b) Alternatively, the Seller may repair the defective Product 
at its own factory, or other place chosen by the Seller;

• 

c) Or alternatively, the Seller may opt for the replacement of 
the defective Products.

• 

In case the repair / replacement of the Products is not pos-
sible, the Seller will pay the Buyer a refund. Such refund shall 
be subjected to quantification, yet must not exceed the price 
paid for the Products. Any compenation for damage is ex-
cluded.

• 

8.6 In case of repair of the Products at a place chosen by the 
Seller or in case of replacement of the defective Products, the 
shipment of the Product will be charged to the Buyer who 
must send them, at his own expense and risk, to the place 
indicated by the Seller.

• 

8.7 In no case shall the Seller be held liable for any indirect 
or consequential damages and/or loss of profit that the Buy-
er may suffer arising out of or caused by defective or faulty 
Products such as (but not limited to) cancellation of orders by 
customers, penalties for late deliveries, forfeitures or indemni-
fications of whatsoever nature.

• 

8.8 The Seller shall indemnify and hold the Buyer harmless 
from any liability or prejudices arising out of defective or 
faulty Products, unless the alleged liability arises from any 
negligent act or’ omission by the Buyer or any failure by the 
Buyer to perform its obligations.  

• 

8.9 The Seller shall not be liable for damage to persons and / 
or property that may derive from improper use of the Prod-
ucts and / or from any use, processing or transformation of 
the Products that do not comply with their intended use and 
/ or with the instructions provided by the Seller, except the 
case of gross negligence or wilful misconduct by the Seller.

• 

The Seller will also not be liable in the event of damage to 
persons or property or in the case of malfunction or damage 
or deterioration of the Product deriving from the fact that the 
Product has been connected to a non-compliant electrical 
system.

• 

8.10 The Buyer shall not be able to raise any claim for personal 
injury or damage to property other than those which are the 
subject of the contract, or for loss of profit, unless it is clear 
from the circumstances of the case that the Seller committed 
“gross negligence” .

• 

8.11 “Gross negligence” shall not include any and all lack of 
adequate care and expertise, but it is to be intended as an 
act or omission by the Seller which implies either a failure to 
consider any serious risk that a conscientious supplier would 

normally have foreseen as likely to occur, or a deliberate ne-
glect of any risk deriving from such act or omission.

• 

8.12 The validity of the Warranty hereto referred is subject 
to activation on the website www.cuppone.com within 48 
hours after the time the Product is installed.

Spare parts

• 

9.1 Until and within 10 years as of the delivery of the Prod-
uct, the Seller undertakes to assist the Buyer in identifying 
the spare parts for the maintenance of the Product (if it is so 
requested by the Buyer). In any case, the Seller is in no way 
responsible for the failure to identify such sources.

Applicable law and multi-step clause

• 

11.1 The Italian law, as the law of the Seller, shall govern the 
sale under the present Terms and Conditions of sale.

• 

11.2 Both the Seller and the Buyer exclude the application of 
the Vienna Convention.

• 

11.3 The parties shall defer the disputes arising out of the 
present contract to a mediation attempt managed by the 
Service of Mediation of the Chamber of Arbitration of Milan.

• 

If the mediation attempt fails, all disputes - included those of 
not contractual nature - arising out of, related or connected 
to the present General Conditions of Sale shall be settled by 
arbitration under the Rules of the Chamber of Arbitration of 
Milan (the Rules), by a sole arbitrator / three arbitrators, ap-
pointed in accordance with the Rules, which are deemed to 
be incorporated by reference into this clause. The Arbitral Tri-
bunal will judge according to the Italian law. The seat of the 
arbitration will be in Milan (Italy). The language of the arbitra-
tion will be Italian.

Summary of Contents for Donatello KDN 435

















Reviews: