M869-GB-2_Letter
5 / 10
mini NEB US
3.4. Hydraulic
connections
Pic
Pic
Pic
Pic. . . . 3.4
3.4
3.4
3.4....1
11
1 –––– Hydraulic connections
Hydraulic connections
Hydraulic connections
Hydraulic connections
The installation of the
machines requires the
connections to the hoses
for water feeding and
discharge. The hoses,
included with the
humidifier, must be
fitted as described
below.
The water supply
hose A
has a threaded
bush G ¾ on both ends.
Connect the L-shaped
end to the solenoid
valve of the MININEB,
and the other end (the
straight one) directly to
a tap (B) or an
extention. It’s suggested
to connect a mechanical
water filter (C)
downstream the tap B.
Concerning the water
discharge, use the hose D supplied or,
if a longer hose is needed, make sure it has an
internal diameter of
3/8”. The hose must be installed as represented in Pic. 3.4.1 with a minimal gradient of 10°, to guarantee
the correct water discharge. An eventual siphon E must be on the main discharge and not on the hose
connected to the machine.
To guarantee a regular and efficient water discharge, carefully check that the discharge hose is fitted with
a gradient and stright, without elbows or bottlenecks of any kind.
3.5. Wall
installation
Pic
Pic
Pic
Pic. . . . 3.5
3.5
3.5
3.5....1
11
1 –––– W
W
W
Wall mounting bracket
all mounting bracket
all mounting bracket
all mounting bracket
Use the supplied metal bracket shown on
Pic. 3.5.1 with screws to install the
machine to a wall. The special bracket
can be used as a template to mark the
holes to be made on the wall, as in Pic.
3.5.2.
•
Observe the minimal distances
written at the Par. 3.2;
•
Check that the extremities of the
bracket are perfectly horizontal
before holing.
•
Check that the wall where the
machine will be installed is able to
sustain the weight in operative
conditions.
Pic
Pic
Pic
Pic. . . . 3.5
3.5
3.5
3.5....2
22
2 –––– Holes
Holes
Holes
Holes on the wall
on the wall
on the wall
on the wall
