Operation Tasks:
This section outlines operations handled during counting
.
Check the
remnant tray
for foreign
materials or
any incorrect
coin sorted
Troubleshooting:
In this section will offer some support into solving issues that
might occur.
Clearing a JAM condition:
Loose Coin
Drawer
If the machine encounters a jam or stop condition. Pressing
the Clear Key will drop the current coin into the Loose
coin Bin if there are coins present there.
Check the thickness adjustment block and
Coin track to ensure the coins are not
jammed by objects
Pressing the PRINT KEY will open the shutter manually and drop any
coin there into the Loose Coin Drawer.
14 | JetWrap® Coin Wrapping Machine | Stopping conditions and Troubleshooting
Stopping conditions and Troubleshooting | JetWrap® Coin Wrapping Machine
| 15
Errors
Possible Reasons
Correction
COUNTING SENSOR
COVERED
！
1.
Wrong parameters.
2.
Coin under sensor.
1.
Correct the parameters
，
2.
Open the top cover
，
lift the coin climbing
mechanism
，
and remove the coins from the
track .
NO COIN
！
1.
No coin in the disk.
2.
Disk exit is jammed.
3.
Coin track is jammed.
4.
Coin climbing belt or the friction
triangle belt is broken.
5.
The set screw of the disk motor clutch
loosens.
1.
Add coins to the disk and press STOP/START
key to continue.
2.
Remove some coins and press STOP/START
key to continue.
3.
Clear jam and press STOP/START key to
continue..
4.
Check the belts and replace them if
necessary.
5.
Check the screw and tighten it.
STEP MOTOR OR
SHUTTER ERROR!
1.
Coin jam when accepting coins.
2.
Stacker finger collide with the stacker
ball bearing holder or the shutter plate.
3.
The shutter plate cannot be opened or
closed as normal.
4.
Coin accepting original point sensor
broken or socket connector falls.
5.
The shutter sensor socket connector
error.
1.
Remove the jammed coins.
2.
Check whether the stacker finger loosens and
tighten the scew.
3.
Check whether shutter plate is jammed by
coins and remove the coins if necessary.
4.
Check the connectors and test the original
point.
5.
Check the connector and test the shutter
sensor.
COIN ROLL GATE JAM
！
1.
Coin roll gate jam.
2.
Connection rod is broken.
1.
Remove the coins from the gate.
2.
Check the rod and replace it if necessary.
PAPER FEED ERROR
！
1.
Paper is not sent correctly
2.
Paper runs out.
3.
Paper is jammed by the paper tucker
guide.
1.
Resend paper.
2.
Install paper and resend paper.
3.
Remove the jammed paper and resend paper.
COIN FEED DOOR
OPEN
！
1.
Coin feed door open.
2.
Stopper screw is worn.
1.
Close the door.
2.
Check the screw and replace it if necessary.
UPPER DOOR OPEN
！
Upper door open.
Close the door.
FRONT DOOR OPEN
！
Front door open.
Close the door.
COIN DISK DOES NOT
TURN!
1.
Coin jam stops the disk rotation.
2.
Deformed coin or coin jam in front of the
thickness adjustment block.
3.
Fuse is blown.
1.
Clear the jam.
2.
Remove the coins.
3.
Replace the fuse.
