Paper Roll Installation
Start by placing the paper roll for the denomination onto the table and open
the front door.
1. Open the paper door as shown:
Operation Tasks:
In this section the counting will begin and operational tasks are
explained.
[B] - [x
]
2018.10.10
12:18
2. Guide the paper as shown:
3. Place the paper into the feed rollers:
( C$2.00)
COIN: 25 (P)
ROLL:
COUNT:
0(R)
0 (P)
Press the
Stop/Start Key
for the
machine to
begin counting.
4. Close the feed door to start the paper
feeding and Opening it stops the paper feeding
5. Feed in the paper slowly and use
the cutter to make the end neat
Press the UP
or Down
Arrows during
counting to
see the
denominations
counted in a
window called
COUNTING
DISPLAY.
6.
Using an Open the door and close the door motion, allow the paper to feed until itstops carefully. You
should ensure the paper is flat against the table and straight along the door as shown:
Pressing the M+ key will add the amount into the memory
and save it. Pressing the MR key recalls it to the screen.
12 | JetWrap® Coin Wrapping Machine | Paper Roll Installation
Stopping conditions and Troubleshooting | J
etWrap® Coin Wrapping Machine
| 13
COUNTING DISPLAY
( C$2.00)
ROLL:
20(R)
COIN: 25 (P) COUNT:
500 (P)
[B] - [M
]
2018.10.10
( C$2.00)
ROLL:
COIN: 25 (P) COUNT:
12:18
20(R)
500 (P)
