12 |
JetTouch
®
Workstation
| How to Use the Supervisor Menu
How to Use the Supervisor Menu |
JetTouch
®
Workstation
| 13
Supervisor Menu
Description
END OF DAY
Press
END OF DAY
to prompt the
END OF DAY
screen below.
When all processing for the session or day is complete,
end-of-day procedures must be performed to properly close
out the system.
Follow the end-of-day procedures below to ensure
system files are properly closed:
1. At PRINT DAY REPORT, press
YES
to print a second day
report after the system is cleared.
2. At CLEAR SYSTEM, press
YES
to clear the system.
Processed totals are cleared from memory and data
tables are reset to zero balances.
3. Press
END
to automatically begin the end-of-day
procedures. Once procedures are complete, the
SYSTEM
START
screen appears.
ON LINE
Press
ON LINE
to connect or disconnect serial-port
communications to the JetScan or JetScan iFX scanner.
To place the workstation in the on-line status:
1. Press
ON LINE
. The active button is yellow, and the
workstation is ready to transmit and receive data.
2. Press
EXIT
to return to the main-processing screen.
Pressing
CANCEL
exits the
END OF DAY
screen
without executing end-of-day procedures and
prompts the
SUPERVISOR MENU
.
STOP
Supervisor Menu
Description
PASSWORD
MAINTENANCE
Press
PASSWORD MAINTENANCE
to prompt the
PASSWORD MAINTENANCE
screen below. This screen is
used to add, change or delete IDs and passwords.
There are two user groups:
• Operators, who have basic user rights.
• Supervisors, who have basic user rights plus the
ability to use the
SUPERVISOR MENU
,
SET UP
and
DIAGNOSTICS
; make overrides; and more. At least
one supervisor must be active.
Follow the steps below to add a new operator or
supervisor:
1. Press
ADD NEW OPERATOR
to prompt the
ADD NEW
OPERATOR
screen.
2. The OPERATOR ID field is highlighted. Enter an
operator ID number up to 12 characters in length.
Press
ENTER
.
3. The OPERATOR PASSWORD field is highlighted. Enter
an operator password number up to nine characters in
length. Press
ENTER
.
4. The CONFIRM OPERATOR PASSWORD field is
highlighted. Enter the operator password number
again. Press
ENTER
.
5. The NAME field is highlighted. Enter an operator name
up to 15 characters in length. Press
ENTER
. The
SUPERVISOR field is highlighted.