Part No. 4801-5188 Rev 3-2016
Super-Saver XL Heater
– Australian Model
Page
13
of 32
6. User Instructions
6.1 Start-Up
Adjust thermostat higher than house temperature. Allow 20 seconds for heater to ignite. On initial start
up or when heater has not been in service for some time, heater may require more than one attempt to
purge air and ignite heater. IF HEATER FAILS TO IGNITE, REFER TO TROUBLE SHOOTING
GUIDE. IF A PROBLEM CAN NOT BE RESOLVED USING THE TROUBLESHOOTING GUIDE,
CONTACT THE LOCAL DEALER OR INSTALLER. Adjust thermostat to desired house temperature.
6.2 Normal Operation
The heater is Thermostat controlled as shown in the diagrams in Section 13.
6.3 Normal Shut-down
Turn Off electrical power using the On/Off Switch and close the ball valve shown in Figure 5.
6.4 Emergency Shut-down
In an Emergency situation, shut off the main gas supply and switch off the electrical power at the
breaker box.
