Part No. 4801-5188 Rev 3-2016
Super-Saver XL Heater
– Australian Model
Page
11
of 32
5.4. Check for Gas Leaks
Before turning on gas, check main supply ball valve to be sure it is open (
Figure 4
). Be sure to check all
connections for leaks with a Gas Leak Testing solution, (soap and water work well). Check to see if gas
ball valve knob is in the ON position. If not, turn counter-
clockwise until knob “clicks” into the ON position.
(This may not apply to all units). Turn on gas by turning ball valve handle into vertical position.
To Heater
Ball Valve
Shown in
"ON" Position
Figure 4
To Gas
Supply
