1. Safety
PNEG-1756
18" and 24" Panel Pit Fan (78° and 90°)
9
User Manual
This manual contains information and instructions essential to the safe installation and use of the
Panel Pit Fan. Read this manual thoroughly
before
attempting any installation or use of the Panel Pit Fan.
Keep this manual with the Panel Pit Fan or in a location where it can be readily accessed. Failure to read
this manual and its safety instructions is a misuse of the equipment.
Correct Use of the Panel Pit Fan
The Panel Pit Fan is designed solely for the purpose of ventilating agricultural buildings. Use of the system
in any other way is a misuse of the system and may endanger safety and health.
Only genuine AP/Cumberland parts are to be used in the installation and use of the Panel Pit Fan. Use of
other non-genuine parts is a misuse of the system and may lead to dangerous situations imperilling the
safety and health of you and others.
This machine is not designed for use in atmospheres where there is a risk of explosion. Such
environments may include enclosed areas of high dusts concentrations, gas vapors and fumes. Use of
the Panel Pit Fan in such an environment is prohibited. If in doubt, contact AP/Cumberland or your dealer.
Unpacking
When receiving the unit, inspect carefully for any damage that may have occurred during transit. Shipping
damage claim must be filed with carrier.
Maintain Equipment and Work Area
•
Do not attempt maintenance or repairs on the fan unless you
are competent to do so. Understand service procedures
before doing work.
•
Use only genuine Cumberland parts when maintaining the
fan. Use of other non-genuine parts is a misuse and can lead
to dangerous situations.
•
Be aware that the fan may operate under automatic control
and may start without warning.
•
Lock-out power source before making adjustments, cleaning,
or maintaining equipment.
•
Keep area clean and dry.
•
Keep hands, feet, and clothing away from moving parts.
•
Keep the fan in proper working condition. Replace worn or
broken parts immediately.
•
Keep the fan clean. Do not allow debris to collect around
motors, belts, pulleys or bearings.
•
Make sure that all electrical enclosures and guards are closed
and locked before re-starting the fan.
ST-0019-2
