3. Installation
16
PNEG-1502
54" Galvanized Butterfly Fan
Inlet Grill Assembly
1. Remove the folded inlet grill from the packaging. Unfold all four (4) sides lining them up perpendicular
to each other. Using the black wire ties, link the sides together using two (2) ties per corner.
After pulling them tight, clip off excess wire tie.
Attach hanging
hooks in corners as shown in
and
(upper left and lower right shown).
Figure 3K Un-Clipped Wire Tie
Figure 3L Clipped Wire Tie
Figure 3M Inlet Grill Hanging Hook - Top
Figure 3N Inlet Grill Hanging Hook - Bottom
